Smart IoT Weather Station Air Quality Monitor
A comprehensive hardware and IoT tutorial for Smart IoT Weather Station Air Quality Monitor.
- Engineered for ESP32 DevKit V1 with production-tested reliability.
- Includes complete pinout connection diagram and noise-filtered wiring.
- Optimized for real-time sensor polling and ultra-low power states.
Smart IoT Weather Station Air Quality Monitor
A comprehensive hardware and IoT tutorial for Smart IoT Weather Station Air Quality Monitor.
Smart IoT Weather Station Air Quality Monitor - Complete Engineering Vault
Verified firmware source code, pinout blueprints, and CAD files for ESP32 DevKit V1.
Free Tutorial vs. Project Vault: The tutorial and educational theory above are 100% free. The Project Vault contains downloadable production source files, complete Fritzing .fzz circuits, laser vector files, and 1-on-1 mentor debugging sessions.
#include<Adafruit_Sensor.h>
const int SAMPLING_RATE_HZ = 250;
// PID Calibrated loop variables initialized
void setup() { Wire.begin(21, 22); calibrateIMUGyroscope(); }
void loop() { float pitch = readSensorPitch(); float roll = readSensorRoll(); }
float calculatePID(float error, float kp, float ki, float kd) { ... }
void transmitTelemetryPackage(uint8_t *packet, size_t length) { ... }
1 Code Snippets & 1 Schematics Locked
Unlock immediate access to verified firmware files, Fritzing wiring diagrams, and laser-cut vectors for ₹49.
Includes circuit breadboard wiring, component pinouts, and laser cutting templates.
Screen-share or show your breadboard to Er. Rohit Sen for 30 minutes of real-time debugging, circuit validation, and project guidance.
See What Mentora Makers Are Building
Real video walk-throughs, breadboard tests, and flight demonstrations submitted by students & parents.
Review This Build & Claim a Free ₹49 Token
Share your breadboard troubleshooting experience, code feedback, or video demo to earn a complimentary token voucher.
Have a Reward Voucher?
Enter your MAKER-TOKEN-XXXX reward code to unlock this project vault immediately.
Earn ₹50 Per Friend You Refer
Get your custom referral link. When friends book a free demo or unlock a project vault, you receive ₹50 via UPI!
How do I upload the source code to the ESP32 DevKit V1?
Open the Arduino IDE or VS Code PlatformIO, select 'ESP32 DevKit V1' under Tools > Board, choose the appropriate COM/TTY port, and click Upload.
Can I power this module using a LiPo battery?
Yes, you can power it via the 5V / VIN pin using a 3.7V LiPo with a 5V boost regulator or an onboard battery management unit.
Learn this in our Junior Tech: Game Design & Scratch
Master computational thinking, sprite animations, coordinate systems, and interactive 2D arcade games using drag-and-drop logic blocks.